E
24
Attaching the Camera Strap
To prevent accidental slippage during use, always use the camera strap.
Attach the camera strap as follows:
1. Thread the small loop of the strap through the strap eyelet
on the camera.
2. Pull the large loop through the small loop until the strap is
firmly secured
Choosing the Language
When you turn on the camera for the first time, the language
setting screen appears, prompting you to choose a language
for displayed information and the LCD monitor. Follow the
steps below to set the OSD (On-Screen Display) language.
1. Select a language that you prefer by using the
/ button.
2. Press the OK button to confirm.
The language setting will be retained even if the camera is turned off.
The provided languages are [ ], [ ], [ ],[ ], [ ], [ ], and [ ].
To Next Page
Loading...
Need help?
General
