E
52
Viewing Video Clips
To view the recorded video clips, follow the steps below.
1. Turn the camera on by sliding the POWER switch.
2. Press the
button.
3. View and select your recorded video clips by using the
/
button.
While playing back the video clips, within 2 sec. the camera
will automatically play the whole movie recording again.
While viewing the video clips, the / keys, the current
image, recorded time will also indicated on the LCD
monitor.
To stop playback, press the OK button.
To exit playback, press the playback button or rotate
the mode dial. Then the camera is ready to take the next
shot or video clip.
The zoom function cannot be activated while playing back the video clips.
When playing back the video clips, the screen will also count down the recorded time.
To Next Page
Loading...
