Nytech ND-4020 User Manual

E
32
Using the Flash
The flash is designed to function automatically when lighting conditions warrant the use of
flash. You can take an image using a suitable flash mode to your circumstances. If you change
the flash mode, the camera will retain that setting even if the camera is turned off.
1. Turn the camera on by sliding the POWER switch.
2. Set the mode dial base on the desired scenery (Manual,
Auto, Macro, Portrait, Landscape, Night Scene or Sports).
3. Press the
button located on the rear side of the camera
repeatedly until your desired flash mode appears on the
LCD monitor.
4. Compose the picture and press the shutter button.
The camera has four flash modes: Automatic Flash (default), Red-Eye Reduction, Fill Flash
(on), and Flash Off. The modes appear cyclically when you press the
button on the rear side
of the camera.

Nytech ND-4020 Specifications

General

Brand	Nytech
Model	ND-4020
Category	Digital Camera
Language	English