Objet Connex500 - Page 39

DOC-13000 Rev. E 7–39
Connex500/350 User Guide
However,ifthewizarddeterminesthataprintheadisfaulty—orthatit
isnegativelyaffectingmodelqualitywiththecurrenthead
configuration—thewizardinstructsyoutoreplaceit.Inthiscase,the
followingscreenappears.
Figure 7-56: Defective print heads found
18. ChooseReplacedefectivehead(s)ifyouarepreparedtoreplacetheprint
headsnow.
or—
ChooseAbortwizardifyouwanttoreplace theprintheadsatanother
time.
Ifyouarereplacingtheprintheadsnow,thewizardguidesyouthroughthe
procedurewhenyouclick
Next.Continuewith“Preparingtheprint block”
onpage 41.
Replacing print heads is expensive. Replace them only after consulting with
an Objet-authorized customer-support engineer.
All manuals and user guides at all-guides.com