OCULUS Pentacam User Manual

2 Safety instructions
2 / 29 Instruction Manual Pentacam® / Pentacam HR® (G/70700/0109/en)
2 Safety instructions
2.1 Safety instructions concerning organisation
The law requires that the manufacturer expressly informs the user about safety aspects
concerning the handling of the Pentacam® / Pentacam HR®. This chapter contains a
summary of the most important points regarding these safety matters.
Attention
Do not use the device if you have not understood the instruction manual.
Î Make sure to keep this instruction manual in a safe place and available to operating
personnel at all times.
Î Observe the legal regulations with regard to accident prevention.
The Pentacam is a high-quality technical product. To ensure that it functions correctly
and safely we recommend the following: Have the Pentacam checked by our service per-
sonnel or an authorised dealer every two years. If an error occurs which you are unable
to correct, label the device as "out of order" and contact our service department.
2.2 Pictogram definitions
Attention
Identifies a potentially dangerous situation which may cause minor injury or damage to
property.
Note
Instructions for use, and useful or important information.
☞
Note
Identifies important information about the product or on how to use it, which requires
special attention.

OCULUS Pentacam Specifications

General

Measurement Time	Less than 2 seconds
Corneal Coverage	Up to 12 mm
Software	Pentacam Software
Data Transfer	USB
Corneal Topography	Yes
Display	External monitor required
Measurement Principle	Scheimpflug imaging
Camera	Rotating Scheimpflug camera
Light Source	Blue LED
Pachymetry	Yes
Anterior Chamber Analysis	Yes
Imaging Principle	Scheimpflug imaging
Fixation	Internal
Power Supply	100-240 V, 50/60 Hz
Resolution	High resolution
Lens Density Measurement	Yes
Dimensions	Varies depending on model and configuration
Weight	Varies by model, check manufacturer specifications
Number of Images	25 or 50