Need help?Do you have a question about the OCULUS Pentacam and is the answer not in the manual?
General| Measurement Time | Less than 2 seconds |
|---|---|
| Corneal Coverage | Up to 12 mm |
| Software | Pentacam Software |
| Data Transfer | USB |
| Corneal Topography | Yes |
| Display | External monitor required |
| Measurement Principle | Scheimpflug imaging |
| Camera | Rotating Scheimpflug camera |
| Light Source | Blue LED |
| Pachymetry | Yes |
| Anterior Chamber Analysis | Yes |
| Imaging Principle | Scheimpflug imaging |
| Fixation | Internal |
| Power Supply | 100-240 V, 50/60 Hz |
| Resolution | High resolution |
| Lens Density Measurement | Yes |
| Dimensions | Varies depending on model and configuration |
| Weight | Varies by model, check manufacturer specifications |
| Number of Images | 25 or 50 |
Steps and precautions for the initial setup and first use of the Pentacam.
Procedures for the regular daily use and operation of the Pentacam device.
Configuration options for capturing Scheimpflug images with the Pentacam.
Specific settings and options available exclusively for the Pentacam HR model.
Explanation of the 'QS' button and its role in assessing Pentacam measurement quality.
Procedure for saving and exporting patient and examination data from the Pentacam system.
Steps for importing patient and examination data received from other sources into the Pentacam.
Guidance for resolving communication errors between the PC and the Pentacam device.
Hardware and software specifications for the computer used with the Pentacam.
To Next Page
