11 Quality Specifications
Instruction Manual Pentacam® / Pentacam HR® (G/70700/0109/en) 19 / 29
11 Quality Specifications
After you have begun measuring either automatically or manually, the
Pentacam program opens. The "QS" button appears in a field below the patient data.
Fig. 11-1: Pentacam program with "QS" button
Î If the "QS" button reads OK, the measurement is correct and can be reproduced.
Î If the "QS" button is red, you must repeat the measurement.
1 "QS" button
To Next Page
Loading...
