9600 Periodic Maintenance Procedure 00-880606-02
Page 33
SYSTEM ACCESSORIES TESTED
VTR (OPTION)
Test VCR Record:
1. Press VCR RECORD.
2. Begin imaging and watch the VTR counter count-up. Stop imaging and the counter should stop
counting.
3. Press the VCR PLAY button.
4. Press the VCR REWIND button and rewind the tape.
5. Verify that the VCR recorded.
THERMAL PRINTER (OPTION)
1. Print out some images and verify that the printer is operational.
HARD COPY CAMERA (OPTION)
1 Take some images with the Hard Copy Camera and verify the camera operation.
JAZ DRIVE (OPTION)
NOTE: Refer to the Supplement, Removable Cine Storage, 00-879857, to aid in testing Jaz drive
operation.
Verify proper operation of the Jaz drive with the following tests:
1. Copy images from the Workstation hard drive and Workstation floppy diskette to the Jaz drive.
2. Copy images from the Jaz drive to the Workstation hard drive and Workstation floppy diskette.
HEART LAB (OPTION)
Access the heart lab Q-card, then follow the steps on the Q-card to test the heart lab software for proper
operation.
LASER CAMERA INTERFACE (OPTION)
Take an X-ray, then print it out on the laser printer to test the laser camera interface components for
proper operation.
To Next Page
Loading...
