9600 Periodic Maintenance Procedure 00-880606-02
Page 9
This symbol indicates that equipment is non-anesthetic proof and should not be operated in the presence
of flammable vapors, liquids or other substances.
PREPARATION
REMOVE POWER AND COVERS
WARNING Electrical circuits inside the equipment use voltages that are capable of causing
serious injury or death from electrical shock. Use appropriate precautions.
1. If the system has power applied, turn the Workstation keyswitch to the OFF position, then unplug
the Workstation's AC power cord from the wall outlet.
2. Remove the Workstation rear cover, left side cover, and open the electronic card rack rear door.
Refer to the 9600 System Service Manual.
To Next Page
Loading...
