Why OHAUS AV53 Scales will not turn on?
Your OHAUS Scales might not be turning on because the AC power is not connected. Ensure the AC adapter is properly connected. Alternatively, the batteries may be discharged, in which case you should replace them.
What does Error 8.4 mean on OHAUS AV53?
Error 8.4 on your OHAUS Scales indicates that the weight reading is below the underload limit. To fix this, put the platform on the balance.
What does error 8.2 mean on OHAUS AV53 Scales?
Error 8.2 on OHAUS Scales means the weight reading is below the Power On Zero limit. Put the platform on the balance.
What does error 8.1 mean on OHAUS Scales?
Error 8.1 on OHAUS Scales means the weight reading exceeds the Power On Zero limit. Clear the platform.
What does Error 8.3 mean on OHAUS AV53 Scales?
Error 8.3 on your OHAUS Scales indicates that the weight reading exceeds the overload limit. Clear the platform to resolve this issue.
Why I cannot calibrate the OHAUS Scale?
If you cannot calibrate your OHAUS Scale, check if the calibration menu is locked and turn it off. Also, verify if LFT is turned on and disable it. Unstable weight readings can also prevent calibration, so eliminate any vibration and drafts.
What to do if battery indicator is flashing on OHAUS AV53 Scales?
If the battery indicator is flashing on your OHAUS Scales, it means the batteries are weak and need to be replaced.
How to fix OHAUS Scale that will not turn on?
If your OHAUS Scale won't turn on, first ensure the AC adapter is properly connected. If it still doesn't power up, the batteries may be discharged and need replacing.
Why I cannot calibrate the OHAUS Scales?
If you cannot calibrate your OHAUS Scales, it could be due to several reasons: 1. The calibration menu might be locked; turn the calibration menu lock off. 2. LFT might be set to on; turn LFT off. 3. There might be an unstable weight reading; eliminate vibration and drafts.
How to fix OHAUS AV53 that does not display accurately?
If your OHAUS Scales are not displaying accurately, it could be due to improper calibration. Try performing a calibration. Another possible cause is an unstable environment. Move the balance to a more suitable, stable location.
General| Capacity | 53 g |
|---|---|
| Display | LCD with backlight |
| Calibration | External Calibration |
| Interface | RS232 |
| Pan Size | 90 mm |
| Power Supply | AC Adapter |
| Operating Temperature Range | 10°C – 30°C |
| Power | AC Adapter |
| Units | g, oz, lb, kg |
To Next Page