Oki B4400 - User Manual

Other manuals for Oki B4400

Installation Instructions4 pages

Safety Information32 pages

Specifications2 pages

Install Guide2 pages

Questions and Answers

M
Michelle CarlsonSep 12, 2025
Why do pages curl excessively from Oki B4400 Printer?
- H
  Henry HamiltonSep 12, 2025
  Excessive curling of pages from your Oki Printer can be due to several reasons: you might be printing on the wrong side of the paper, so turn the paper over in the tray, installing it print side down. Moisture in the paper or improper storage can also cause this, so avoid storing paper in areas of excessive temperature and humidity and keep it in protective wrapping. High humidity can also be a factor; the recommended operating humidity is 20-80%.
C
christina46Sep 9, 2025
Why is my Oki B4400 printing darker than usual?
- O
  olsonrobertSep 10, 2025
  If your Oki Printer's print is darker than usual, the darkness setting is likely too high. Change the darkness setting to a lower level.
E
Erica NobleSep 8, 2025
Why are bold characters smeared on my Oki B4400 Printer?
- D
  david36Sep 8, 2025
  If bold characters and dark lines are smeared on your Oki Printer's output, it's likely that the toner is low. Install a new toner cartridge to resolve this.
J
Jordan BrownSep 7, 2025
How to fix distorted print on Oki B4400?
- J
  Jesus JohnsonSep 7, 2025
  Distorted print from your Oki Printer may be due to a paper path, lamp assembly, or fusing unit problem. Generate a cleaning page. Contact service.
T
Theresa RichAug 23, 2025
How to fix Oki Printer input jam?
- E
  Emily RamirezAug 23, 2025
  To resolve an input jam on your Oki Printer: start by removing the paper tray, then remove any crumpled or folded paper. Also, check and remove any paper from the underside of the printer. Finally, replace the paper tray. After removing the damaged paper, the printer should resume printing.
C
Christopher JacksonSep 5, 2025
What causes vertical white streaking on Oki Printer?
- C
  Cynthia Dunn DDSSep 5, 2025
  Vertical white streaking or faint areas on pages printed by your Oki Printer can occur when the toner is low and does not distribute properly, or the drum is worn out. Replace the toner cartridge. Check the drum and replace it if necessary. Contact service.
Z
Zachary GarciaSep 4, 2025
How to fix oblong area of faint print on Oki Printer?
- R
  Raymond RogersSep 4, 2025
  An oblong area of faint print on each page from your Oki Printer is likely due to using paper exposed to high humidity. Try changing paper stocks, checking the paper storage environment, or using a dehumidifier; also, check the toner level.
D
djonesSep 3, 2025
What causes repetitive marks on Oki B4400 Printer pages?
- R
  reedamandaSep 3, 2025
  Repetitive marks on pages printed by your Oki Printer are often caused by a damaged image drum cartridge, which results in marks every 1.6 inches (4.06 cm) due to surface nicks and scratches. Generating a cleaning page may temporarily resolve the issue.
J
joseph59Sep 2, 2025
What to do if Oki Printer prints all black?
- V
  Victoria EstradaSep 2, 2025
  If your Oki Printer is printing all black pages, it indicates a hardware problem. Contact service.
T
Tiffany AyalaAug 31, 2025
Why does my Oki B4400 print pages with grey background?
- S
  Samantha MarshallSep 1, 2025
  A grey background on pages printed by your Oki Printer is often due to static electricity, typically caused by dry environments, which makes toner stick to the background. To fix this, change the paper to a smoother laser bond or use a humidifier.

Oki B4400 Specifications

General

Print Technology	LED
First Page Out Time	5 seconds
Processor	200 MHz
Paper Capacity	250 sheets
Connectivity	Parallel, USB
Printer Languages	PCL6, PCL5e, PostScript 3
Maximum Paper Size	A4
Interface	Parallel, USB
Operating Systems Supported	Windows 2000, XP, Vista