43502101TH Rev.1 38 /
Oki Data CONFIDENTIAL
2.3.19 Manual Feed Guide Assy
(1) Remove the upper cover assy (see 2.3.1).
(2) Open the manual feed guide assy 1, and release the engagement on both sides with the main unit
by carefully bending the manual feed guide assy 1.
Note : 1.
When remounting, verify the proper the engagements as shown in the diagram.
2.
Be careful not to touch (or rotate) the DC motor thoughtlessly. Rotating the DM motor
counterclockwise removes the eject spring. (Refer to 2.3.9.)
Put the post into the groove.
Put the post into the groove.
1
1
To Next Page
Loading...
