Oki B721 User Manual

- 27 -
About the Options
1
Setup
7 Insert the right side of the metal plate
(2) into the printer, close it, then secure
it by tightening the screw.
2
8 Close the access cover (1).
1
9 Plug the AC cable and removed cables
into your printer, and then turn on the
power switch.
10 Press the scroll button on the operator
panel.
11 Check that [Conguration] is selected
then press the <ENTER> button.
䣒䣴䣫䣰䣶䢢䣕䣧䣥䣷䣴䣧䢢䣌䣱䣤
䣅䣱䣰䣨䣫䣩䣷䣴䣣䣶䣫䣱䣰
䣒䣴䣫䣰䣶䢢䣋䣰䣨䣱䣴䣯䣣䣶䣫䣱䣰
䣒䣴䣫䣰䣶䢢䣈䣴䣱䣯䢢䣗䣕䣄䢢䣏䣧䣯䣱䣴䣻
䣈䣷䣰䣥䣶䣫䣱䣰䣵䢢䢢䢢䢢䢢䢢䢳䢱䢴
12 Press the scroll button several times
to select [System] then press the
<ENTER> button.
䣅䣱䣰䣨䣫䣩䣷䣴䣣䣶䣫䣱䣰䢢䢢䢢䢳䢱䢳
䣕䣷䣲䣲䣮䣫䣧䣵䢢䣎䣫䣨䣧
䣐䣧䣶䣹䣱䣴䣭
䣕䣻䣵䣶䣧䣯
䣖䣴䣣䣻䢢䣅䣱䣷䣰䣶
13 Press the scroll button several
times to select [HDD] then press the
<ENTER> button.
䣕䣻䣵䣶䣧䣯䢢䢢䢢䢢䢢䢢䢢䢴䢱䢴
䣔䣃䣏
䣈䣮䣣䣵䣪䢢䣏䣧䣯䣱䣴䣻
䣊䣆䣆
䣒䣗䢢䣘䣧䣴䣵䣫䣱䣰
14 Check that the value of [HDD].
䢳䢸䢲䢰䢲䢶䣉䣄䣝䣈䢸䢶䣟
䣊䣆䣆䢢䢢䢢䢢䢢傍䢢䢳䢱䢳
Note
● If [uninstalled] is displayed, turn off your printer
and unplug the AC cable and all the cables, and then
reinstall the hard disk.
15 Press the <ON LINE> button.

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard