Oki B721 User Manual

- 35 -
Loading Paper
2
Printing Basic Operation
13 Press the scroll button to select the
type of the loaded paper and then press
the <ENTER> button.
傍傍傍傍傍䣏䣧䣦䣫䣣䢢 䣖䣻䣲䣧 䢢䢢 䢢 䢢䢢 䢳䢱䢴
䢬䢢䣒䣮䣣䣫䣰
䣎䣧䣶䣶䣧䣴䣪䣧䣣䣦
䣎䣣䣤䣧䣮䣵
䣖䣴䣣䣰䣵䣲䣣䣴䣧䣰䣥䣻
14 Press the <BACK> button until
[MPTray Cong] is displayed.
䣏䣒 䣖䣴䣣䣻䢢 䣅䣱䣰䣨䣫䣩 傍䢢䢳䢱䢳
䣒䣣䣲䣧䣴䢢䣕䣫䣼䣧
䣏䣧䣦䣫䣣䢢䣖䣻䣲䣧
䣏䣧䣦䣫䣣䢢䢢䣙䣧䣫䣩䣪䣶
䣖䣴䣣䣻䢢䣗䣵䣣䣩䣧
15 Press the scroll button several times
to select [Media Weight] then press
the <ENTER> button.
䣏䣒䣖䣴䣣䣻䢢 䣅䣱䣰䣨䣫䣩 傍䢢䢳䢱䢳
䣒䣣䣲䣧䣴䢢䣕䣫䣼䣧
䣏䣧䣦䣫䣣䢢䣖䣻䣲䣧
䣏䣧䣦䣫䣣䢢䣙䣧䣫䣩䣪䣶
䣖䣴䣣䣻䢢䣗䣵䣣䣩䣧
16 Press the scroll button to select the
weight of the loaded paper and then
press the <ENTER> button.
䣏䣧䣦䣫䣣䢢䣙䣧䣫䣩䣪䣶 傍䢢䢳䢱䢴
䢬䢢䣎䣫䣩䣪䣶
䣏䣧䣦䣫䣷䣯䢢䣎䣫䣩䣪䣶
䣏䣧䣦䣫䣷䣯䢢䣊䣧䣣䣸䣻
䣏䣧䣦䣫䣷䣯
17 Press the <ON LINE> button to exit the
menu mode.
Registering Custom Sizes
To load custom size paper, you need to register
the width and length of the paper before
printing. The range of the sizes you can set
differs according to the paper tray.
Tray Available size range
Tray 1
Trays 2–4
(Option)
Width:
148–216 mm (5.8–8.5 inches)
Length:
210–356 mm (8.3–14.0 inches)
MP Tray Width:
76.2–216 mm (3.0–8.5 inches)
Length:
127–1321 mm (5.0–52.0 inches)
Note
● [X/Y Dimensions] is displayed only when [Paper Size]
is set to [Custom].
1 Press the scroll button on the operator
panel.
2 Press the scroll button several times
to select [Menus] then press the
<ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䣵䢢䢢䢢䢢䢢䢢䢴䢱䢴
䣃䣦䣯䣫䣰䢢䣕䣧䣶䣷䣲
䣒䣴䣫䣰䣶䢢䣕䣶䣣䣶䣫䣵䣶䣫䣥䣵
䣏䣧䣰䣷䣵
3 Check that [Tray Conguration] is
selected then press the <ENTER>
button.
䣏䣧䣰䣷䣵 䢢䢢䢢䢢䢢䢢䢢傍䢳䢱䢳
䣕䣻䣵䣶䣧䣯䢢䣃䣦䣬䣷䣵䣶
䣒䣴䣫䣰䣶䢢䣃䣦䣬䣷䣵䣶
䣖䣴䣣䣻䢢䣅䣱䣰䣨䣫䣩䣷䣴䣣䣶䣫䣱䣰

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard