- 43 -
Test Printing from the Printer
2
Printing Basic Operation
●● Test Printing from the Printer
Check that you can print with the printer. Check the detailed settings and status of your printer by
printing the contents of the settings (Menu Map).
Note
● When the printer is in power saving mode, press the <POWER SAVE> button to restore from the mode.
1 Press the <Fn> key on the operator
panel.
2 Enter “100” using the ten-key pad,
then press the <ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䢢䣐䣷䣯䣤䣧䣴
䣇䣰䣶䣧䣴䢢䢳䢯䢵䣦䣫䣩䣫䣶䢢䣐䣷䣯䣤䣧䣴
3 Press the <ENTER> button as
[Execute] is selected.
䣅䣱䣰䣨䣫䣩䣷䣴䣣䣶䣫䣱䣰䢢䢢䢢䢳䢱䢳
䣇䣺䣧䣥䣷䣶䣧
4 After nishing a print of printer settings,
check that the added options are
properly indicated.
Setup for printing from a printer
completes if the options have been
properly added.
To Next Page
Loading...
