- 50 -
Setting the Buzzer
2
Printing Basic Operation
●● Setting the Buzzer
You can specify whether to sound a buzzer when an invalid operation is performed on the operator
panel or when an error occurs.
1 Press the scroll button on the operator
panel.
2 Press the scrol buttonl several times
to select [Admin Setup] then press the
<ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䣵䢢䢢䢢䢢䢢䢢䢴䢱䢴
䣃䣦䣯䣫䣰䢢䣕䣧䣶䣷䣲
䣒䣴䣫䣰䣶䢢䣕䣶䣣䣶䣫䣵䣶䣫䣥䣵
䣃䣫䣴䣒䣴䣫䣰䣶
䣏䣧䣰䣷䣵
3 Enter the administrator password, using
the ten-key pad.
The factory default password is “aaaaaa.” Press
the <ENTER> button whenever inputting one
character.
䣇䣰䣶䣧䣴䢢䣒䣣䣵䣵䣹䣱䣴䣦
4 Press the <ENTER> button.
5 Press the scroll button several times
to select [Panel Setup] then press the
<ENTER> button.
䣃䣦䣯䣫䣰䢢䣕䣧䣶䣷䣲䢢䢢䢢䢢䢢䢵䢱䢶
䣖䣫䣯䣧䢢䣕䣧䣶䣷䣲
䣒䣱䣹䣧䣴䢢䣕䣧䣶䣷䣲
䣑䣶䣪䣧䣴䣵䢢䣕䣧䣶䣷䣲
䣒䣣䣰䣧䣮䢢䣕䣧䣶䣷䣲
6 Press the scroll button several times
to select [Invalid Operation Volume]
or [Error Volume]then press the
<ENTER> button.
䣒䣣䣰䣧䣮䢢䣕䣧䣶䣷䣲䢢䢢䢢䢢䢢䢴䢱䢴
䣇䣴䣴䣱䣴䢢䣘䣱䣮䣷䣯䣧
䣋䣰䣸䣣䣮䣫䣦䢢䣑䣴䣧䣴䣣䣶䣫䣱䣰䢢䣘䣱䣮䣷
7 Press the scroll button several times
to select a desired option then press the
<ENTER> button.
䣋䣰䣸䣣䣮䣫䣦䢢䣑䣲䣧䣴䣣䣶䣫䣱䣰䢢䣘䢰䢰䢰䢳䢱䢳
䣑䣨䣨
䢬
䢢䣎䣱䣹
䣊䣫䣩䣪
8 Press the <ON LINE> button to exit the
menu mode.