Oki B721 User Manual

- 45 -
Setting the Time that Elapses Before Entering the Sleep Mode
2
Printing Basic Operation
●● Setting the Time that Elapses Before Entering the
Sleep Mode
Note
● When the printer is in power saving mode, press the <POWER SAVE> button to restore from the mode.
● Make sure that the message “Ready To Print” is displayed in the operator panel. If the message is not displayed, press the
<ON LINE> button.
1 Press the <Fn> key on the operator
panel.
2 Enter “201” using the ten-key pad, then
press the <ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䢢䣐䣷䣯䣤䣧䣴
䢴䢲䢳
䣇䣰䣶䣧䣴䢢䢳䢯䢵䣦䣫䣩䣫䣶䢢䣐䣷䣯䣤䣧䣴
3 Press the scroll button or to specify
the time and then press the <ENTER>
button.
䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䣕䣮䣧䣧䣲䣖䣫䣯䣧 䢢䢢䢢 䢳䢱䢵
䢬䢢䢳䢢䣯䣫䣰䣷䣶䣧
䢴䢢䣯䣫䣰䣷䣶䣧䣵
䢶䢢䣯䣫䣰䣷䣶䣧䣵
䢵䢢䣯䣫䣰䣷䣶䣧䣵
4 Press the <ON LINE> button.
Memo
● The power save time can be selected from among the
options shown below.
The factory default setting is 15 minute.
- [1 minute]
- [2 minutes]
- [3 minutes]
- [4 minutes]
- [5 minutes]
- [10 minutes]
- [15 minutes]
- [30 minutes]
- [60 minutes]

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard