- 39 -
Supported Paper
2
Printing Basic Operation
Note
● When specifying a printing area, please take into account the differences of printing position as followings:
Print start position: ±2 mm, Paper skew: ±1 mm/100 mm, Image stretch: ±1 mm/100 mm (when paper ream weight is
80 g/m
2
(20 lb))
● This printer cannot print on an ink.
*2 Use paper that meets the following conditions:
● A pigment or an ink used to color paper is heat resistant (210°C).
● Paper that has same characteristics with plain paper and used for an electronic photo printer.
To Next Page
Loading...
