Oki B721 User Manual

- 60 -
Connecting to a Computer
3
Printing
 WPS-PIN
1 Press the scroll button to select
[Wireless Setting] and then press the
<ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䣵䢢䢢䢢䢢䢢䢢
䢢䢢䢢
䢵䢱䢵
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣕䣧䣶䣶䣫䣰䣩
2 Enter the administrator password
using the ten-key pad, then press the
<ENTER> button.
The factory default password is “aaaaaa”. Press
the <ENTER> button whenever inputting one
character.
䣇䣰䣶䣧䣴䢢䣒䣣䣵䣵䣹䣱䣴䣦
3 When the display shown below appears,
read it carefully. Press the <ENTER>
button or wait until the display changes.
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣵䣧䣶䣶䣫䣰䣩䢢䢢䢳䢱䢵
䣇䣰䣣䣤䣮䣫䣰䣩䢢䣹䣫䣴䣧䣮䣧䣵䣵
䣰䣧䣶䣹䣱䣴䣭䢢䣥䣱䣯䣯䣷䣰䣫䣥䣣䣶䣫䣱䣰䢢
䣹䣫䣮䣮䢢䣦䣫䣵䣣䣤䣮䣧䢢䣹䣫䣴䣧䣦
4 Check that [Automatic Setup (WPS)]
is selected and then press the <ENTER>
button.
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣐䣧䣶䣹䣱䣴䣭䢢䣕䣧䣮䣧䣥䣶䣫䣱䣰
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣴䣧䣥䣱䣰䣰䣧䣥䣶䣫䣱䣰
䣃䣷䣶䣱䣯䣣䣶䣫䣥䢢䣕䣧䣶䣷䣲䢢䢪䣙䣒䣕䢫
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣕䣧䣶䣶䣫䣰䣩䢢䢢䢢䢢䢢䢳䢱䢳
5 Press the scroll button to select
[WPS-PIN] and then press the
<ENTER> button.
䣙䣒䣕䢯䣒䣋䣐
䣙䣒䣕䢯䣒䣄䣅
䣕䣧䣶䢢䣣䣷䣶䣱䣯䣣䣶䣫䣥䣣䣮䣮䣻 䢢 䢪䣙䣒 䢢 䢳䢱䢳
6 Set the 8-character PIN code displayed
on the display screen on the access
point and start WPS-PIN.
Note
● After pressing the button, immediately perform step
7.
● The PIN code input method and WPS-PIN starting
method differ depending on the access point. For
details, refer to the instruction manual for the access
point.
7 Select [Yes] and then press the
<ENTER> button.
䣒䣋䣐䢢䣯䣧䣶䣪䣱䣦
䣒䣋䣐䢢䣥䣱䣦䣧䢼䢢䢴䢳䢺䢹䢳䢸䢻䢸
䣐䣱
䣛䣧䣵
䣇䣺䣧䣥䣷䣶䣧䣁
Memo
● If [No] is selected, the screen returns to that
from step 5. Each time the conrmation screen is
displayed, the PIN code is automatically generated
and changed.

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard