Oki C5550 MFP User Manual

C5550 MFP User’s Guide
Operation > 111
The level of saturation determines whether the color
is pale or rich.
(b) Lightness
Increase the lightness by moving the triangle to the
right or to the left to decrease the lightness.
5. Using color balance
The Color Balance control allows you to set optimal image
color quality.
Scanner 13.eps
You can either move the relevant pointer toward a color (in
the above example 63% green has been selected) or, if
known, enter the figure in the box at the top.
The first box refers to the Cyan/Red percentage content,
the second to Magenta/Green and the third to Yellow/Blue.
6. Color drop-out
Click the button and the dialog box below will be displayed.
This allows you to remove one of the R (Red), G (Green),

Oki C5550 MFP Specifications

Printer Specifications

print speed color	20 ppm
print speed black & white	32 ppm
time to first page color	11 seconds
time to first page black & white	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Fax Specifications

fax modem speed	33.6 Kbps
transmission speed	3 seconds/page
fax resolution	200 x 400 dpi
one-touch dial locations	10
broadcast transmission locations	100
fax memory	100 pages (1.5 MB)

Copy Specifications

copy speed color	20 cpm
copy speed black & white	32 cpm
first copy out color	23 seconds
first copy out black & white	15 seconds
copy resolution	600 x 600 dpi
copy scaling range	25% to 400%

Scanner Specifications

scan type	Color and black & white; flatbed
scan speed black & white	3 sec./pg.
scan speed color	6 sec./pg.
scan resolution	4800 dpi
scanner ADF capacity	50 sheets
paper sizes min/max	4.1" x 5.8" to 8.5" x 47.24"

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Environmental Specifications

size (WxDxH)	19.7" x 23.6" x 26.4" (50.0 cm x 60.0 cm x 67.0 cm)
weight	81.6 lb. (37.0 kg)
power consumption peak	1200W
power consumption standby	100W
power consumption power save	<15W
acoustic noise operating	<53 dB
acoustic noise standby	<39 dB