Oki C5550 MFP User Manual

C5550 MFP User’s Guide
A guide to printing > 200
G RAPHIC PRO
This section describes the color matching options available for
Graphic Pro.
The Graphic Pro color matching system is based around ICC
profiles. These profiles are down loaded to the MFP using the
Profile Assistant utility and then selected in the printer driver.
When a job is sent to the MFP, the ICC profiles are applied to the
print job on the MFP.
W HAT CAN YOU DO WITH GRAPHIC PRO COLOR MATCHING ?
The Graphic Pro color matching system is both powerful and
flexible. Here are some examples of how the Graphic Pro color
matching system can be used:
Matching mfp color to an RGB input device
By using the ICC profiles of a scanner, digital camera or monitor,
the MFP’s color can be matched to the input device.
Printer simulation
Your MFP can be used to simulate the color output of another
printer, even when printing RGB documents. For best results, use
CMYK documents when simulating the color output of other
printers.
CMYK ink simulation
Your MFP can be used to simulate the color output of a
commercial printing press (SWOP, Euroscale or Japan Color
inks).
NOTES
1. Some features of Graphic Pro color matching can only be
used if your MFP is fitted with a hard disk. The MFP hard
disk is required if you wish to download and use your own
ICC profiles to the MFP.
2. The MFP’s internal hard disk is an optional accessory.
3. If your MFP does not have a hard disk fitted, you will only
be able to select the factory default profiles that are
built-in to the MFP.

Oki C5550 MFP Specifications

Printer Specifications

print speed color	20 ppm
print speed black & white	32 ppm
time to first page color	11 seconds
time to first page black & white	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Fax Specifications

fax modem speed	33.6 Kbps
transmission speed	3 seconds/page
fax resolution	200 x 400 dpi
one-touch dial locations	10
broadcast transmission locations	100
fax memory	100 pages (1.5 MB)

Copy Specifications

copy speed color	20 cpm
copy speed black & white	32 cpm
first copy out color	23 seconds
first copy out black & white	15 seconds
copy resolution	600 x 600 dpi
copy scaling range	25% to 400%

Scanner Specifications

scan type	Color and black & white; flatbed
scan speed black & white	3 sec./pg.
scan speed color	6 sec./pg.
scan resolution	4800 dpi
scanner ADF capacity	50 sheets
paper sizes min/max	4.1" x 5.8" to 8.5" x 47.24"

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Environmental Specifications

size (WxDxH)	19.7" x 23.6" x 26.4" (50.0 cm x 60.0 cm x 67.0 cm)
weight	81.6 lb. (37.0 kg)
power consumption peak	1200W
power consumption standby	100W
power consumption power save	<15W
acoustic noise operating	<53 dB
acoustic noise standby	<39 dB