Oki C5550 MFP User Manual

C5550 MFP User’s Guide
Print settings and security > 75
S TORE TO HARD DISK /J OB S POOLING
This feature allows print jobs to be created on the PC and stored
on the MFP’s hard disk for printing on demand. This is good for
forms, generic memos, letterhead, stationery, etc.
If you use this feature for standard forms, for example, you can
walk up to the MFP at any time and print off your forms without
having to re-send them from the PC.
The document is not automatically deleted from the MFP’s hard
disk after printing. It remains there for future use until you delete
it from the printer control panel or from your PC with the Storage
Device Manager utility.
There are three parts in job spooling:
1. Sending the document. See “Sending the document” on
page 75.
2. Printing the document. See “Printing the document” on
page 77.
3. Deleting a stored document. See “Deleting a stored
document” on page 78.
S ENDING THE DOCUMENT
1. If using the PCL driver, in the [Setup] tab choose any
saved driver settings you wish to use. See “Recalling
saved driver settings” on page 187.
2. In the driver’s [Job Options] tab, click [Store to HDD].
NOTE
If this choice does not appear in the driver screens, or if it is
grayed out, check to ensure that the hard disk is enabled in
the printer driver. (See “Adjusting windows printer drivers”
on page 148.)

Oki C5550 MFP Specifications

Printer Specifications

print speed color	20 ppm
print speed black & white	32 ppm
time to first page color	11 seconds
time to first page black & white	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Fax Specifications

fax modem speed	33.6 Kbps
transmission speed	3 seconds/page
fax resolution	200 x 400 dpi
one-touch dial locations	10
broadcast transmission locations	100
fax memory	100 pages (1.5 MB)

Copy Specifications

copy speed color	20 cpm
copy speed black & white	32 cpm
first copy out color	23 seconds
first copy out black & white	15 seconds
copy resolution	600 x 600 dpi
copy scaling range	25% to 400%

Scanner Specifications

scan type	Color and black & white; flatbed
scan speed black & white	3 sec./pg.
scan speed color	6 sec./pg.
scan resolution	4800 dpi
scanner ADF capacity	50 sheets
paper sizes min/max	4.1" x 5.8" to 8.5" x 47.24"

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Environmental Specifications

size (WxDxH)	19.7" x 23.6" x 26.4" (50.0 cm x 60.0 cm x 67.0 cm)
weight	81.6 lb. (37.0 kg)
power consumption peak	1200W
power consumption standby	100W
power consumption power save	<15W
acoustic noise operating	<53 dB
acoustic noise standby	<39 dB