C5550 MFP User’s Guide
Operation > 94
5. Press the Mono button (7) to send your document(s).
Manual redial
Control menu faxbasic_oda.jpg
Press the Redial button (9) on the control panel to display the
fax number of the last transmission (successful or not), then
press the Mono button (6) to send a fax to this number.
Receiving a Fax
Your MFP is set to receive faxes automatically, if you wish to
change this to manual receive refer to“Manual receive” on
page 70 for details.
NOTE
1. Fax transmissions are sent in black and white only.
2. If you make a mistake during the transmission process,
press the STOP button (8) to cancel the operation.
NOTE
If the MFP is in use, i.e. sending a fax or scanning, then any
incoming faxes will be rejected.
During other functional operations, for example copying,
filing, e-mailing, etc., then any incoming faxes will be stored
and printed out when the MFP is available.
To Next Page
Loading...
