C5550 MFP User’s Guide
Configuring your machine > 70
Manual receive
Upon receiving an incoming call, the MFP will ring until you press
the Start button to receive the fax.
To enable the manual receive option:
1. Press the Menu button to prompt the menu settings
screen.
2. Using the UP arrow key, navigate to Fax Settings and
press OK.
3. Using the UP arrow key, navigate to Setup Fax and press
OK.
4. Using the DOWN arrow key, navigate to Manual Receive
and press OK.
5. Press Return to store the new configuration settings and
exit the menu.
Adding a telephone handset
If you want to add a telephone handset to your MFP, connect the
line to the Tel socket (in certain countries it may be necessary to
use a telephone plug adaptor).
NOTE
Loop the telephone line round the ferrite once as shown.
To Next Page
Loading...
