Oki C5550 MFP User Manual

C5550 MFP User’s Guide
Configuring your machine > 71
Tel line core.eps
You will also need to update the telephone settings to set the ring
response:
1. Press the Menu button on the control panel.
2. Using the UP arrow key, navigate to Fax Settings and
press OK.
3. Using the UP arrow key, navigate to Setup Fax then press
OK.
4. Using the UP/DOWN arrows keys, navigate to Ring
Response and press OK.
5. Select the required response setting and press OK.
6. Press Return to store the new configuration setting and
exit the menu.
NOTE
Manual receive must also be activated. See “Manual receive”
on page 70..

Oki C5550 MFP Specifications

Printer Specifications

print speed color	20 ppm
print speed black & white	32 ppm
time to first page color	11 seconds
time to first page black & white	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Fax Specifications

fax modem speed	33.6 Kbps
transmission speed	3 seconds/page
fax resolution	200 x 400 dpi
one-touch dial locations	10
broadcast transmission locations	100
fax memory	100 pages (1.5 MB)

Copy Specifications

copy speed color	20 cpm
copy speed black & white	32 cpm
first copy out color	23 seconds
first copy out black & white	15 seconds
copy resolution	600 x 600 dpi
copy scaling range	25% to 400%

Scanner Specifications

scan type	Color and black & white; flatbed
scan speed black & white	3 sec./pg.
scan speed color	6 sec./pg.
scan resolution	4800 dpi
scanner ADF capacity	50 sheets
paper sizes min/max	4.1" x 5.8" to 8.5" x 47.24"

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Environmental Specifications

size (WxDxH)	19.7" x 23.6" x 26.4" (50.0 cm x 60.0 cm x 67.0 cm)
weight	81.6 lb. (37.0 kg)
power consumption peak	1200W
power consumption standby	100W
power consumption power save	<15W
acoustic noise operating	<53 dB
acoustic noise standby	<39 dB