Oki C5550 MFP - Setting the Fax Facility; Initial Set Up

C5550 MFP User’s Guide
Configuring your machine > 64
S ETTING THE FAX FACILITY
I NITIAL SET UP
The following parameters must be set before using the fax
function on your MFP:
> Date and time
> Country code
> Station ID and number
There are other parameters that can be adjusted to suit your
personal preferences later if required, refer to fax set up table for
details (See “Fax settings” on page 41.).
To set fax parameters:
1. Press the Menu button to prompt the menu settings
screen.
2. Using the UP arrow key, navigate to Management and
press OK.
3. When prompted, enter the password and press OK.
4. Press OK to select Date/Time.
5. Enter today’s date and the correct time, then press OK to
confirm.
6. Using the UP arrow key, navigate to Country Code and
press OK.
7. Select the country in which the MFP is situated and press
OK.
8. Press Return to go back to the main menu settings
screen.
9. Using the UP arrow key, navigate to Fax Settings and
press OK.
10. Using the UP arrow key, navigate to Setup Fax and press
OK.
11. Press OK to select Station ID.