C5550 MFP User’s Guide
Troubleshooting > 165
Initializing PU flash error Restart the machine. (Turn it off
and on again).
If the code still appears, contact
your dealer.
Initializing Turn off Scner
Turn on again
Program Check Error
Turn it off and on again.
Normal Cancelling job
(Jam)
Indicates a jam occurring when
“jam recovery” set to “Off”.
Remove the paper and resend the
print job. (See “Clearing paper
jams” ).
If the code still appears, contact
your dealer.
Normal Cancelling job
(User denied)
Indicates a job being cancelled
due to no print permit:
1.A job received from a user who
is denied printing.
2.A color job received from a user
who is denied color printing.
Contact your network
administrator for help.
Normal Cancelling job
(Buffer full)
Indicates that a job is being
cancelled because the printer
area where the logs are stored
has been used up and also
“Cancel job” is specified as an
operation at the time of Log Full.
Contact your network
administrator for help.
Warning Order <%color2%> toner Toner low, order replacement
cartridge(s).
Warning <%color%> waste toner full.
Replace toner
Waste toner will fill up the box.
Toner replacement is necessary
(Y, M or C).
As long as this warning is being
displayed, a waste toner full error
occurs, the printer shifts to Off-
line and stops each time it has
printed about 50 copies.
Warning Non OEM <%color%> toner
detected
It shows the toner cartridge of
authorized 3rd party.
STATUS
/ CODE
MESSAGE MEANING / ACTION
To Next Page
Loading...
