Oki C5550 MFP User Manual

C5550 MFP User’s Guide
A guide to printing > 202
S TEP 1 - G ATHER OR CREATE THE ICC PROFILES
Where can I get the profiles I need?
S TEP 2 - D OWN LOADING ICC PROFILES TO THE HARD DISK
The internal hard disk must be installed in the printer.
You can download profiles to the MFP hard disk using the Profile
Assistant utility.
1. Launch Profile Assistant
2. Select an MFP
If this is the first time you have used Profile Assistant, you
should allow the utility to search for compatible machines.
Select the connection type “Network (TCP/IP)”, and click
Start to begin searching.
If you know the MFP’s IP address, you can enter it
manually.
3. The main screen of Profile Assistant displays the profiles
resident on the selected MFP’s hard disk. To download a
new profile to the MFP:
(a) Click Add.
(b) Select an ICC profile from your computer's hard
disk.
PROFILE
TYPE
WHERE TO GET PROFILES
RGB Source
(RGB Input)
Obtain your RGB source profiles from your scanner, camera
or monitor manufacturer.
CMYK
Simulation
(CMYK input)
Obtain the simulation profile from the manufacturer of the
printer you wish to simulate.
Printer
(CMYK Output)
The factory default profiles for your MFP are built-in. If you
need greater accuracy, you should create your own MFP
profile using third-party ICC profile creation software.
Link Profile You can create Link profiles using third-party ICC profile
creation software.
Note that not all ICC profile creation software can create
Link profiles.

Oki C5550 MFP Specifications

Printer Specifications

print speed color	20 ppm
print speed black & white	32 ppm
time to first page color	11 seconds
time to first page black & white	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Fax Specifications

fax modem speed	33.6 Kbps
transmission speed	3 seconds/page
fax resolution	200 x 400 dpi
one-touch dial locations	10
broadcast transmission locations	100
fax memory	100 pages (1.5 MB)

Copy Specifications

copy speed color	20 cpm
copy speed black & white	32 cpm
first copy out color	23 seconds
first copy out black & white	15 seconds
copy resolution	600 x 600 dpi
copy scaling range	25% to 400%

Scanner Specifications

scan type	Color and black & white; flatbed
scan speed black & white	3 sec./pg.
scan speed color	6 sec./pg.
scan resolution	4800 dpi
scanner ADF capacity	50 sheets
paper sizes min/max	4.1" x 5.8" to 8.5" x 47.24"

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Environmental Specifications

size (WxDxH)	19.7" x 23.6" x 26.4" (50.0 cm x 60.0 cm x 67.0 cm)
weight	81.6 lb. (37.0 kg)
power consumption peak	1200W
power consumption standby	100W
power consumption power save	<15W
acoustic noise operating	<53 dB
acoustic noise standby	<39 dB