C5550 MFP User’s Guide
Loading paper > 27
Face up stacker open.eps
5. For face down printing, make sure the face up (rear)
stacker (3) is closed (the paper exits from the top of the
MFP). Stacking capacity is approximately 250 sheets,
depending on paper weight.
6. For face up printing, make sure the face up (rear)
stacker (3) is open and the paper support (4) is extended.
Paper is stacked in reverse order and tray capacity is
approximately 100 sheets, depending on paper weight.
7. Always use the face up (rear) stacker for heavy paper
(card stock, etc.).
CAUTION!
Do not open or close the rear paper exit while printing
as it may result in a paper jam.
3
4
To Next Page
Loading...
