Oki C5550 MFP - Color Menu Settings

C5550 MFP User’s Guide
Configuring your machine > 51
Color menu
MPT
Mediaweight
Medium
20 - 24 lb.
75-90g/m²
Heavy
24 - 32 lb.
91-120g/m²
ULTRA HEAVY
32 - 54 lb.
121-203g/m²
Selects the media weight to be fed from
the multi purpose tray.
Unit Of
Measure
MILLIMETER
INCH
Selects the unit of measure for the next
two items.
X-Dimension
3.937 - 8.2677 -
8.5039 inches
100-210-216
MILLIMETER
Selects the width of paper defined by
the “CUSTOM” settings referred to in
the foregoing PAPER SIZE settings.
Y-Dimension
5.8268 - 11.6929
- 47.244 inches
148-297-1200
MILLIMETER
Selects the length of paper defined by
the “Custom” settings referred to in the
foregoing PAPER SIZE settings. Note
that media of up to 1200mm in length
can be fed from the multi purpose tray
for banner printing.
ITEM CHOICE DESCRIPTION
ITEM CHOICE DESCRIPTION
ColorDensity
Control
AUTO
MANUAL
If set to AUTO, image density will be
automatically adjusted at power on,
when a new image drum or toner
cartridge is installed, and at intervals of
100, 300 and 500 drum counts. If a 500
drum count interval occurs during a
print job it will occur at the end of that
job, and will take up to 55 seconds. If
set to manual, this adjustment will only
be performed when initiated by the next
menu item.
Adjust Density EXECUTE
Selecting this will perform the auto
density set up immediately.
Color Tuning PRINT PATTERN
Selecting this item prints the color
tuning pattern to help you adjust the
color balance.