C5550 MFP User’s Guide
Operation > 98
1. Place your document(s) with text face UP in the ADF or
face DOWN on the glass.
2. Press the Fax Mode button on the control panel to prompt
the Fax screen.
3. Press the Additional Settings button.
4. Using the DOWN arrow key, navigate to the Manual Feed
setting and press OK.
5. Select “ON” and press OK.
6. Press Return to exit the menu and return to the fax
screen.
7. Press Mono to start scanning the first document.
Once the current scanning operation is complete, the LCD
will display “To scan another page press select/OK”. If you
have further documents to scan press OK to continue
scanning or press Mono to continue sending the fax.
Polling receive
Polling is a process in which documents are loaded into a
machine, and the machine is then set to wait for a call from a
remote location before faxing. If the remote machine is set to
hold data in memory for transmission to a local machine when
contacted, the procedure is called “polling receive”.
To set the fax to poll receive:
1. Press the Fax Mode button on the control panel to prompt
the Fax screen.
2. Press the Additional Settings button.
3. Using the DOWN arrow key, navigate to the Polling
Receive setting and press OK.
4. Select “ON” and press OK.
5. Press Return to exit the menu and return to the fax
screen.
6. Enter the desired location using the Speed Dial keys or
the numeric keypad.
7. Press Mono to begin polling.
To Next Page
Loading...
