沖データ企業秘密・OkiDataCONFIDENTIAL
45530603TX −101／130
Priority
Status Message Ready
LED
Atten
LED
Function Status level
Error code
Status code
2
3
Fuser Mount Signal Warning
This warning is cleared when a normal signal is detected at a signal check by opening and
closing the cover.
214 1
2
3
□
Change Fuser Unit
Varies
On Notifies the life of the fuser unit (warning). Displayed in a combination of other message in
the first line. Warning only (No Life error).
This appears when the cover was opened and closed just after the fuser life error
occurred.
Warning
10091
214.1
1
2
3
□
Non OEM Belt Unit Detected
Varies
On Indicates detection of a belt unit that is not optimal. Warning
10659
214.2
1
2
3
□
Incompatible Belt Unit
Varies
On Indicates detection of a belt unit that is not optimal. Warning
10660
214.3
1
2
3
□
Non Genuine Belt Unit
Varies
On Indicates detection of a belt unit that is not optimal. Warning
10661
215 1
2
3
□
Change Belt Unit
Varies
On Notifies the transfer belt is end of its life (Warning).
This status message is displayed when opening/closing a cover or turning power on again
after the transfer belt life error or belt waste toner full error occurs.
Warning
10080
216 1
2
3
□
Change Waste Toner Box
Varies
On Indicates that there is no free space in the waste toner box.
This is just a warning, and printing does not stop.
Warning
10948
219 1
2
3
□
%COLOR% Toner Empty
Varies
On Notifies toner is empty.
This status message (warning) is displayed when opening/closing a cover or turning power
on again after the toner empty error occurs.
%COLOR%
Yellow
Magenta
Cyan
Black
White
Clear
Warning
10966 (Y)
10967 (M)
10968 (C)
10965 (K)
10681 (W)
10682 (L)
219.5
1
2
3
□
%COLOR% Toner Empty
Varies
On Indicates that toner cartridge is empty.
When there are not print data, it is displayed.
If either of CMY occurs,
when it receives the monochrome data or monochrome+spot color data, prints the data.
when it receives the color data, turn into the Empty Error of Priority=334 and cannot print it.
If either of spot color occurs,
when it receives the monochrome data or color data, prints the data.
when it receives the spot color data, turn into the Empty Error of Priority=334 and cannot
print it.
In fact, K can not occurs. When K toner cartridge is empty, even there are no print data,
turn into the Empty Error of Priority=334.
%COLOR%
Yellow
Magenta
Warning
10966 (Y)
10967 (M)
10968 (C)
10681 (W)
10682 (L)
To Next Page
Loading...
