Oki C911 - Page 103

沖データ企業秘密・OkiDataCONFIDENTIAL
45530603TX −103／130
Priority Status Message Ready
LED
Atten
LED
Function Status level
Error code
Status code
Yellow
Magenta
Cyan
Black
White
Clear
%PAGES%
1~500
(Maximum number of pages might be changed in the future)
10667 (W)
10668 (L)
221.2 1
2
3
□
%COLOR% Image Drum Life, Print Quality Not
Guaranteed
Varies On Notifies the last prolonged period of the image drum life.
This appears after the hidden operation was done at the life limitation.
%COLOR%
Yellow
Magenta
Cyan
Black
White
Clear
Warning 10686(Y)
10687(M)
10688(C)
10685(K)
10689 (W)
10690 (L)
222 1
2
3
□
Belt Reflex Error
Varies On Belt Reflex Check Error.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning 10053
223 1
2
3
□
Density Shutter Error2
Varies Varies Density Adjustment Shutter Error 2.Error that does not occur at user level.Displayed only
in FactoryMode.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning -
224 1
2
3
□
Density Shutter Error1
Varies Varies Density Adjustment Shutter Error 1.Error that does not occur at user level.Displayed only
in FactoryMode.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning -
225 1
2
3
□
Density Color Calibration Error
Varies Varies Density Adjustment Color Calibration Error.Error that does not occur at user
level.Displayed only in FactoryMode.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning -
226 1
2
3
□
Density Color Sensor Error
Varies Varies Density Adjustment Color Sensor Error.Error that does not occur at user level.Displayed
only in FactoryMode.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning -
227 1
2
3
□
Density Black Calibration Error
Varies Varies Density Adjustment Black Calibration Error.Error that does not occur at user
level.Displayed only in FactoryMode.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning -
228 1
2
3
□
Density Black Sensor Error
Varies Varies Density Adjustment Black Sensor Error.Error that does not occur at user level.Displayed
only in FactoryMode.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning -
229 1
2
3
□
%COLOR% Image Drum Smear Error
Varies Varies Density Adjustment ID ERROR 2; smear due to ID failure.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning 10976