沖データ企業秘密・OkiDataCONFIDENTIAL
45530603TX −104／130
Priority
Status Message Ready
LED
Atten
LED
Function Status level
Error code
Status code
%COLOR%
Yellow
Magenta
Cyan
Black
White
Clear
230 1
2
3
□
%COLOR% Low Density Error
Varies
Varies
Density Adjustment ID ERROR; LED out of focus is assumed.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
%COLOR%
Yellow
Magenta
Cyan
Black
White
Clear
Warning
10975
232 1
2
3
□
Registration Error <n>
Varies
On When a color registration error is detected with coarse adjustment, or with the main-scan
line adjustment.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
n
1= Station#1
2 = Station#2
3 = Station#3
4 = Station#4
5 = Station#5
Warning
10051
233 1
2
3
□
Registration Sensor Error <n>
Varies
On When a color registration error is detected with the fine control of registration adjustment,
or with the sub-scan line adjustment.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
n
1= Station#1
2 = Station#2
3 = Station#3
4 = Station#4
5 = Station#5
Warning
10052
234 1
2
3
□
Fuser Slack Sensor Error
Varies
On When a fuser slack sensor error is detected.
PU firmware does not notify this warning to CU firmware at the time of Shipping Mode.
Therefore, this status does not occur in a user environment.
Warning
10933
237 1
2
3
□
Job Offset Home Error
Varies
On The job offset home position sensor error is detected. The job offset function becomes
disabled, however, printing can continue.
Warning
10059
238 1
2
3
□
%TRAY% Empty
Varies
On %TRAY%: The tray is empty. Treated as Warning until printing to the empty tray is
designated.
In this case, Leisus I/F : corresponding bits of both LFTERR and LFTERR2 should be '0'.
%TRAY%
Tray1
Tray2
Tray3
Warning
1601x
x: Tray #
To Next Page
Loading...
