沖データ企業秘密・OkiDataCONFIDENTIAL
45530603TX - 18/130
requirements.
e) Postcards
The same requirements for auto feeder trays are applied. See 2.1.2, 2), e) for the
requirements.
Double Single
Figure 3. Postcard Orientations (MPT)
(f) Labels
Labels can be fed only from an MPT tray. The following labels should be used:
(g) Glossy-finish paper
The same requirements as for auto feeder trays are applied. See 2.1.2.2)-g).
(h) Envelopes
Envelopes can be fed only from an MPT. Envelopes to be used should not have
deformations, including twists and curls.
Envelopes shown in table 12 and meeting the following requirements should be used:
• Kraft, electrophotographic printer or dry PPC paper;
• Chou envelopes: 85-g/m
2
basis weight paper, with a neatly folded flap;
• You envelopes: 85-g/m
2
basis weight paper, with a neatly folded flap; and
• COM-10, DL, C4, C5: 24-lb. paper, with a neatly folded flap.
(Fold the flaps of envelopes with glue on the flap)
Recommended envelopes:
Chou 3, 85-g/m
2
Kraft, end-opening (N3S-108 by Imura Envelope)
COM-10, Super bright 24-lb. white wove (by Quality Park)
3