沖データ企業秘密・OkiDataCONFIDENTIAL
45530603TX - 17/130
h) Transfer paper
Transfer Paper can be fed from a standard auto feeder tray or an MPT.
However, When transfer paper is printed, it is recommended to set the media one by
one on the MP tray for printing.
Transfer paper of the type shown in Table 8a is recommended.
Note 1) Support only with Pro9541WT.
Table8a.Transfer paper Specifications
Paper Type Name Description
Transfer
Paper
Forever Laser-Dark
(No-Cut) LowTemp,
Forever Laser Light
(No-Cut)
Neenah IMAGE CLIPR
LaserDark
Neenah IMAGE CLIPR
LaserLight
Shockline
FC TOPDARKNEW
Shockline
FC TOPCUT2016
TMT WoW7.8
TMT T.One
Printing the transfer paper with dedicated CMF setting.
For troubleshooting of transfer paper,
See troubleshooting.
(3) Requirements for MPT Paper
The paper that can be fed from an MPT installed as standard in
C911/C931/C941/Pro9541WT is as described below.
The print media that can be fed from the auto feeder cassettes of the printer can all be fed
from the MPT. Besides, the MPT can feed postcards, labels and envelopes.
(a) Paper Weights
45 to 310kg (52 to 360g/m
2
)
(b) Standard Paper
The paper shown in table 6 is given for specifying the print performance of the MPT of
C911/C931/C941/Pro9541WT, as well as the auto feeder trays of the printer. Using for
the MPT the standard paper shown in the table is recommended.
(c) Types and Sizes of Plain Paper and Recycled Paper
The paper types shown in table 9. See 2.1.3, (2) for the paper sizes and capacities that
can be used for the MPT of C911/C931/C941/Pro9541WT.
Table 9. Paper Types that can be Used for MPT
Paper Type
Name Description
Plain Paper
High-quality paper for
electrophotographic copy
printers
45- to 310-kg weight (52- to 360-g/m
basis weight), approximately 0.08- to
0.36-mm thickness paper for monochrome and color electrophotographic
printers that use toner.
Recycled
Paper
Recycled paper for
electrophotographic
copying
45- to 310-kg weight (52- to 360-g/m
2
basis weight), approximately 0.08- to
0.36-mm thickness recycled paper used for general copiers that use toner.
d) Transparencies
The same requirements for auto feeder trays are applied. See 2.1.2, 2), d) for the
4