To Next Page

To Previous Page

沖データ企業秘密・OkiDataCONFIDENTIAL



45530603TX - 16/130

printer.

• The labels do not peel, by passing through the printer, from their base paper.

• The thicknesses of the labels and their base paper are 0.1 to 0.2 mm.

• The labels cover throughout their base paper, no glue being squeezed out of them.

The following is the recommended labels for the MPT.

: ＬＢＰ−F７１××series (of Kokuyo, A4)

: ＬＢＰ−Ｆ650 (of Kokuyo, B5)

: White Laser Label 5161 (of Avery, Letter)

: White Laser Label 7162,7664,7666 (of Avery, A4)

Note 1: The printer may produce a thin film of toner over labels when it prints them or,

on labels, may print images lighter than user-specified ones.

Note 2: The toner fusibility of the printer may be lowered.

Note 3：Pro9541WT is not supported Labels.

g) Glossy-finish paper

Glossy-finish paper can be fed only from a standard auto feeder tray or an MPT.

Glossy-finish paper meeting the following requirements should be used. Glossy-finish

paper must:

• Be made intended for use on electrophotographic printers or dry PPCs;

• Does not melt, change in quality, or warp, in printer thermal fusing processes; and

• Be 0.13 to 0.16 mm thick.

Recommended glossy-finish paper is:

: Excellent Gloss (A4, A3, or A3Nobi size) (for Oki color printers).

: JD Coat 127/157 (A4,A3 or SRA3) (when using spot-color clear )

Note 1) In a high temperature and high humidity environment, a thin toner film is likely to

be printed on white print of glossy-finish paper and the paper cannot be used.

(The paper can be used in an environment below 25°C temperature and 60%

humidity.)

Note 2) Compared with plain paper, glossy-finish paper may often be printed with a thin

toner film over it, or may be printed with lighter images. Prior to use the paper, it

must be printed and checked for proper image quality printed on it, and for its

proper feedability.

Note 3) Glossy-finish paper may lower the fusibility of toner. Images deviated from

positions to print may be printed on lightweight glossy-finish paper.

Note 4) Glossy-finish paper may slip e.g. because of its coatings and not be fed.

Note 5) Pro9541WT is not supported Glossy paper.

Oki C911 Product Specification

Other manuals for Oki C911