Oki C911 - Page 64

沖データ企業秘密・OkiDataCONFIDENTIAL 
45530603TX - 64/130
Category1 Category2 Category3 Category4 Item Value Default
機能
Valid
Kakugata#2
Kakugata#3
Kakugata#8
Index Card
A4Wide[SEF]
A4Wide[LEF]
B6Half
Custom
X Dimension 2.5inch
 ~
8.3inch
 ~
8.5inch
 ~
13inch
*A
*L
Sets paper width of custom size paper in
MPTray(Multi-Purpose Tray).
Sets the direction that is perpendicular to the direction
in which paper runs.
It is determined either inch or millimeter is displayed
depending on a setting in "Functions"-"Menus"-"Tray
Configuration"-"Unit of Measure."
Default: Size of the default paper for each brand.
[Conditions for display]
"Custom" is selected in "Functions"-"Menus"-"Tray
Configuration"-"MPTray Config"-"Paper Size."
JE
64millimeter
 ~
210millimeter
 ~
216millimeter
 ~
330millimeter
*A
*L
Y Dimension 3.5inch
 ~
11.0inch
 ~
11.7inch
 ~
52.0inch
*L
*A
Sets paper width of custom size paper in
MPTray(Multi-Purpose Tray).
Sets the same direction as that paper runs.
It is determined either inch or millimeter is displayed
depending on a setting in "Functions"-"Menus"-"Tray
Configuration"-"Unit of Measure."
【Conditions for display】
"Custom" is selected in "Functions"-"Menus"-"Tray
Configuration"-"MPTray Config"-"Paper Size."
JE
89millimeter
 ~
279millimeter
 ~
297millimeter
 ~
1321millimeter
*L
*A
Media Type Plain
Letterhead
Transparency
Labels
Bond
Recycled
Card Stock
Rough
Glossy
Postcard
Envelope
USERTYPE1
USERTYPE2
USERTYPE3
USERTYPE4
USERTYPE5
USERTYPE6
USERTYPE7
USERTYPE8
USERTYPE9
USERTYPE10
USERTYPE11
USERTYPE12
USERTYPE13
USERTYPE14
USERTYPE15
USERTYPE16
USERTYPE17
USERTYPE18
USERTYPE19
USERTYPE20
* Sets the media type for Multi-purpose Tray.
User type 1 to 20 are displayed only if registered in the
host PC.
If the host PC specifies the character strings for media
types, they will be displayed instead.
JE
Media Weight Auto
Ultra Light
Light
Medium Light
Medium
Medium Heavy
Heavy
Ultra Heavy1
Ultra Heavy2
Ultra Heavy3
Ultra Heavy4
Ultra Heavy5
* Sets the paper weight for Multi-purpose Tray. JE
Tray Usage Normal Tray
When Mismatching
Do Not Use
* Sets MPTray usage.
Normal Tray: （Tray selection/switching) uses as a
normal tray.
When Mismatching: if paper mismatch occurs （paper
size/media type in a tray and that of print data don't
match), paper is requested to MPTray instead of the
specified tray.
Do Not Use
: sets MPTray unavailable both in Auto Tray
Select and Auto Tray Switch.
If Do Not Use is selected and also MPTray is specified
by Paper Feed, operation in this case is the same as
that performed when Normal Tray is selected (MPTray
is used auto tray).
JE
Tray1 Config Paper Size Cassette Size
Custom
Other Size
* Sets paper in TRAY1. (Select whether to use paper
size detected by tray's auto size detection or to set
custom paper size.)
CASSETTE SIZE: The size detected by paper size
sensor
CUSTOM: Size selected in the following MENU.
JE
X Dimension 3.9inch
 ~
8.3inch
 ~
8.5inch
 ~
*A
*L
Sets paper width of custom size paper in TRAY1.
Sets the direction that is perpendicular to the direction
in which paper runs.
It is determined either inch or millimeter is displayed
depending on a setting in "Functions"-"Menus"-"Tray
Configuration"-"Unit of Measure."
JE