Oki C911 - Page 73

沖データ企業秘密・OkiDataCONFIDENTIAL 
45530603TX - 73/130
Category1 Category2 Category3 Category4 Item Value Default
機能
Valid
-0.25millimeter clipped.
【Conditions for display】
Tray4 is installed.
Y Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* For the paper fed from Tray4
Adjust the position of a whole print image in the
direction paper runs, that is
vertically (at 0.25mm pitch).
Any parts of the print image that go beyond the
printable area as a result of this designation are
clipped.
【Conditions for display】
Tray4 is installed.
JE
Duplex X Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* For the paper fed from Tray4
At the time of back page printing of Duplex, adjusts the
position of the whole print image in the direction that is
perpendicular to the direction paper runs, that is
horizontally (at 0.25mm pitch).
Any parts of the print image that go beyond the
printable area as a result of this designation are
clipped.
【Conditions for display】
• Installation of Tray 4 and Duplex Unit.
JE
Duplex Y Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* For the paper fed from Tray4
At the time of back page printing of Duplex, adjusts the
position of a whole print image in the direction paper
runs, that is vertically (at 0.25mm pitch).
Any parts of the print image that go beyond the
printable area as a result of this designation are
clipped.
【Conditions for display】
• Installation of Tray 4 and Duplex Unit.
JE
Overprint X Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* In the second-time printing (feeding from Duplex Unit)
for spot color overprint on the paper fed from Tray 4,
this menu corrects the overall position of the print
images in the direction perpendicular to the paper
running direction (i.e., horizontal) in 0.25 mm.
Selecting this menu allows clipping of print images that
beyond the printable area.
[Conditions for display]
.Five color printer and installation of Tray 4 and Duplex
Unit.
JE
Overprint Y Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* In the second-time printing (feeding from Duplex Unit)
for spot color overprint on the paper fed from Tray 4,
this menu corrects the overall position of the print
images in the paper running direction (i.e., portrait) in
0.25 mm.
Selecting this menu allows clipping of print images that
beyond the printable area.
[Conditions for display]
.Five color printer and installation of Tray 4 and Duplex
Unit.
JE
Tray5
X Adｊust
0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* For the paper fed from Tray5
Adjusts the position of a whole print image in the
direction that is perpendicular to the direction paper
runs, that is horizontally (at 0.25 mm pitch).
Any parts of the print image that go beyond the
printable area as a result of this designation are
clipped.
【Conditions for display】
Tray5 is installed.
JE
Y Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* For the paper fed from Tray5
Adjust the position of a whole print image in the
direction paper runs, that is vertically (at 0.25mm pitch).
Any parts of the print image that go beyond the
printable area as a result of this designation are
clipped.
【Conditions for display】
Tray5 is installed.
JE
Duplex X Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* For the paper fed from Tray5
At the time of back page printing of Duplex, adjusts the
position of the whole print image in the direction that is
perpendicular to the direction paper runs, that is
horizontally (at 0.25mm pitch).
Any parts of the print image that go beyond the
printable area as a result of this designation are
clipped.
【Conditions for display】
• Installation of Tray 5 and Duplex Unit.
JE
Duplex Y Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* For the paper fed from Tray5
At the time of back page printing of Duplex, adjusts
the
position of a whole print image in the direction paper
runs, that is vertically (at 0.25mm pitch).
Any parts of the print image that go beyond the
printable area as a result of this designation are
clipped.
【Conditions for display】
• Installation of Tray 5 and Duplex Unit.
JE
Overprint X Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* In the second-time printing (feeding from Duplex Unit)
for spot color overprint on the paper fed from Tray 5,
this menu corrects the overall position of the print
images in the direction perpendicular to the paper
running direction (i.e., horizontal) in 0.25 mm.
Selecting this menu allows clipping of print images that
beyond the printable area.
[Conditions for display]
.Five color printer and installation of Tray 5 and Duplex
Unit.
JE
Overprint Y Adjust 0.00millimeter
+0.25millimeter
 ~
+2.00millimeter
-2.00millimeter
 ~
-0.25millimeter
* In the second-time printing (feeding from Duplex Unit)
for spot color overprint on the paper fed from Tray 5,
this menu corrects the overall position of the print
images in the paper running direction (i.e., portrait) in
0.25 mm.
Selecting this menu allows clipping of print images that
beyond the printable area.
JE