Oki C911 - Page 74

沖データ企業秘密・OkiDataCONFIDENTIAL 
45530603TX - 74/130
Category1 Category2 Category3 Category4 Item Value Default
機能
Valid
[Conditions for display]
.Five color printer and installation of Tray 5 and Duplex
Unit.
Paper Black Setting 0
+1
+2
+3
-3
-2
-1
* Use it for fine adjustment of the significant dust
attachment on the surface and when thin spot has the
sighificant impact on the standard/BLACK printing or
other cases occur. The decrement is necessary if the
scattered or snow-white like printing is the result in the
high density-printing area. The increment is necessary
if the thin printing is found.
ET
Paper Color Setting 0
+1
+2
+3
-3
-2
-1
* Use it for fine adjustment of the significant dust
attachment on the surface and when thin spot has the
significant impact on standard paper /COLOR printing.
The decrement is necessary if the scattered or
snow-white like printing is the result in the high
density-
printing area. The increment is necessary if the
thin printing is found.
ET
Trans. Black Setting 0
+1
+2
+3
-3
-2
-1
* Use it for fine adjustment of the significant dust
attachment on the surface and when thin spot has the
significant impact on OHP/BLACK printing. The
decrement is necessary if the scattered or snow-white
like printing is the result in the high density-printing
area. The increment is necessary if the thin printing is
found.
ET
Trans. Color Setting 0
+1
+2
+3
-3
-2
-1
* Use it for fine adjustment of the significant dust
attachment on the surface and when thin spot has the
significant impact on OHP/COLOR printing. The
decrement is necessary if the scattered or snow-white
like printing is the result in the high density-printing
area. The increment is necessary if the thin printing is
found.
ET
SMR Ｓｅｔｔｉｎｇ
Cyan 0
+1
+2
+3
-6
-5
-4
-3
-2
-1
* With cyan, to correct variations in print results caused
by temperature/humility conditions and difference in
print density/frequency. Change the setting when print
quality is uneven.
ET
Magenta 0
+1
+2
+3
-6
-5
-4
-3
-2
-1
* With Magenta , to correct variations in print results
caused by temperature/humility conditions and
difference in print density/frequency. Change the
setting when print quality is uneven.
ET
Yellow 0
+1
+2
+3
-6
-5
-4
-3
-2
-1
* With Yellow , to correct variations in print results
caused by temperature/humility conditions and
difference in print density/frequency. Change the
setting when print quality is uneven.
ET
Black 0
+1
+2
+3
-6
-5
-4
-3
-2
-1
* With Black,, t
o correct variations in print results caused
by temperature/humility conditions and difference in
print density/frequency. Change the setting when print
quality is uneven.
ET
White 0
+1
+2
+3
-6
-5
-4
-3
-2
-1
* With White,, t
o correct variations in print results caused
by temperature/humility conditions and difference in
print density/frequency. Change the setting when print
quality is uneven.
ET
BG Setting Cyan 0
+1
+2
+3
-3
-2
-1
*
With Cyan,ｔo correct variations in print results caused
by temperature/humility conditions and difference in
print density/frequency. Change the setting when
background is dark.
ET
Magenta 0
+1
+2
+3
-3
-2
-1
*
With Magenta,ｔo correct variations in print results
caused by temperature/humility conditions and
difference in print density/frequency. Change the
setting when background is dark.
ET
Yellow 0
+1
+2
+3
-3
-2
-1
*
With Yellow,ｔo correct variations in print results
caused
by temperature/humility conditions and difference in
print density/frequency. Change the setting when
background is dark.
ET
Black 0
+1
*
With Black,ｔo correct variations in print results caused
by temperature/humility conditions and difference in
ET
4