Oki C911 - Page 82

沖データ企業秘密・OkiDataCONFIDENTIAL 
45530603TX - 82/130
Category1 Category2 Category3 Category4 Item Value Default
機能
Valid
CR Function CR
CR+LF
* Sets performance when CR code is received.
(Not available with products for Japan.)
JE
LF Function LF
LF+CR
* Sets performance when LF code is received.
(Not available with products for Japan.)
JE
Line Length
80 桁
136 桁
* Specifies the number of characters per line.
(Not available with products for Japan.)
JE
Form Length 11 inch
11.7 inch
12 inch
*L
*A
Specifies the length of paper.
(Not available with products for Japan.)
JE
TOF Position 0.0inch
0.1inch
~
1.0inch
* Sets the position from the top edge of paper.
(Not available with products for Japan.)
JE
Left Margin 0.0inch
0.1inch
~
1.0inch
* Sets the amount to shift the horizontal print start
position to the right.
(Not available with products for Japan.)
JE
Fit to Letter Enable
Disable
*L
*A
Sets the printing mode that can fit print data, equivalent
to 11 inches (66 lines), in the LETTER-size printable
area.
(Not available with products for Japan.)
(ODA: "Enable" = default
JE
Text Height Same
Diff
* Sets height of a character.
SAME: Regardless of CPI, same height
DIFF: According to CPI, character heights
vary.[Existing model compatible]
(Not available with models for Japan)
JE
Continuous Paper
Mode
On
Off *
Sets to Landscape the edit direction of paper supported
by A3 printer.
(Not available with PX711 and models for Japan.)
This menu is designed in consideration of SIDM
continuous-sheet paper (pin-feed, fanfold paper).
Irrespective of an setting specified in the menu for
setting paper orientation, the setting On set in the menu
prints media that can be used on A4 printers, such as
A4 or letter size paper, in portrait or
ientation, and media
that can be used only on A3 printers, such as A3 size
paper, in landscape orientation.
JE
EPSON FX
Setup
Character Pitch 10 CPI
12 CPI
17 CPI
20 CPI
Proportional
* Specifies character pitch.
(Not available with products for Japan.)
JE
Character Set SET-2
SET-1
* Specifies a character set.
(Not available with products for Japan.)
JE
Symbol Set IBM-437
IBM-850
IBM-860
IBM-863
IBM-865
PCSet1
PCExtUS
PCExtD/N
PCSet2US
PCSet2D/N
* Specifies a symbol set.
(Not available with products for Japan.)
JE
Roman-8
ISO L1
PC-8
PC-8Dan/Nor
PC-850
Legal
ISO-2IRV
ISO-4UK
ISO-6ASC
ISO-10S/F
ISO-11Swe
ISO-14JASC
ISO-15Ita
ISO-16Por
ISO-17Spa
ISO-21Ger
ISO-25Fre
ISO-57Chi
ISO-60Nor
ISO-61Nor
ISO-69Fre
ISO-84Por
ISO-85Spa
German
Spanish
ISODutch
RomanExt
ISOSwedish1
ISOSwedish2
ISOSwedish3
VNMath
VNInt'l
VNUS
PSMath
PSText
Math-8
PiFont
MSPublish
Win3.0
DeskTop
Win3.1L1
MCText
PC-852
Win3.1L5
Win3.1L2
CWIHung
PC-857TK
ISOL2