Oki C911 Product Specification

沖データ企業秘密・OkiDataCONFIDENTIAL
45530603TX −97／130
Priority Status Message Ready
LED
Atten
LED
Function Status level
Error code
Status code
115 1
2
3
□
□
Copy kkk/lll
Varies Varies Copy printing. kkk: The number of pages in printing. lll: The total number of printing. When
the number of copy is 1, it is a normal printing display.
Normal 10099
115.3 1
2
3
Preparing Cancel Blink Varies Preparing cancel Normal 10649
115.5 1
2
3
Verifying Job Blink Varies Indicates that the integrity of print data for encrypted authentication is being verified (for
corruption and tampering).
Normal 10897
116 1
2
3
Cancelling Job Blink Varies Indicates that job cancellation has been instructed and data is being ignored until the job
completion.
Normal 10007
117 1
2
3
Cancelling Job Blink Varies Indicates if JAM occurs when Jam Recover is OFF, that job cancellation has been
instructed and data is being ignored until the job completion.
Normal 10007
118 1
2
3
Cancelling Job Blink Varies Indicates a job being cancelled due to no print permit. (Related to JobAccount)
1. A job received from a user who is denied printing.
2. A color job received from a user who is denied color printing.
Normal 10007
119 1
2
3
Cancelling Job Blink Varies Indicates that a job is being cancelled because the printer area where the logs are stored
has been used up and also "Cancel job" is specified as an operation at the time of Log Full.
(Related to JobAccount)
Normal 10007
119.8 1
2
3
□
Calibrating
Varies Varies Indicates the period of reading from or writing to the memory tags in toner cartridge/image
drum unit.
Normal 10839
120 1
2
3
□
Adjusting Temp.
Varies Varies Shows cooling down status.
It is cautious of a period following "Adjusting Temp".
＊This status is reserved for the future support (and does not occur currently).
Normal 10989
121 1
2
3
□
Adjusting Temp
Varies Varies Warming up.
In this case, Leisus I/F : STSENG bit #0 should be '0'.
Normal 10003
121.5 1
2
3
□
Optimizing Temp
Varies Varies Indicates that printing has been suspended for a while due to high temperature of the
drum, or the printer is in a wait state to cope with heat at the time of switching narrow paper
to wide paper.
Normal 10963
122 1
2
3
□
Power Save
Varies Varies A printer is in power save mode. Displayed in a combination of other message in the first
line.
LCD back light extincts in the energy saving mode and blinks after that modebrightens
after exiting that mode. If the power is on during the energy saving mode, it lights up and
extincts after 30 seconds. However, the energy saming mode remains.
Also, it lights up in the priority 365 in shut down process.
From the power-saving mode, when the time going to Sleep mode is passed, printer enters
Sleep mode.
Normal 10094
- 1 Invalid Operation Varies Varies With the printer unable to switch to the Power Save mode, pops up with a press or Normal -

Oki C911 Specifications

General

Brand	Oki
Model	C911
Category	Printer
Language	English