Oki Data CONFIDENTIAL
44043511TH Rev.2
259 /
Function
LCD
Status Message Help Message
Shows the toner cartridge of the printer is not
installed.
Yellow
Magenta
Cyan
Black
%COLOR% Toner Not
Installed
–
Shows the image drum of the printer is at the end of
its life. This state occurs when the printer is restored
by the opening and closing of its cover with the
image drum’s life error caused.
Yellow
Magenta
Cyan
Black
%COLOR% Image Drum
Life
–
Shows a job offset home position sensor error of
the printer. This error disables the job offset function
of the printer, but the printer can continue printing.
Job Offset Home Error
–
Shows the printer is empty of paper in the tray. This
is a notification until the printer is specified to print
from the tray.
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
%TRAY% Empty
–
Shows a lift-up error occurred with the tray of the
printer. The tray is regarded as being empty of
paper and cannot be used for printing.
MPT
Tray 1
Tray 2
Tray 3
Tray 4
Tray
%TRAY% Lift Up Error
–
Shows the tray of the printer is loaded with
too much paper. With this message, which is a
notification, the printer does not pause printing.
MPT
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
%TRAY% Overfilled
–
Shows an inverter is not connected to the printer.
The stapling, punching or fastening function of,
or the high-capacity stacker, of the finisher of the
printer cannot be used.
Inverter is Removed
–
Shows the finisher is not connected to the inverter.
The stapling, punching or fastening function of,
or the high-capacity stacker, of the finisher of the
printer cannot be used.
Finisher is Removed
–
Shows available HDD or flash memory of the printer
are low. This message is a temporary notification
and, until a job during which this state occurred ends,
stays displayed. After that, the message is removed.
File System is Full
–
To Next Page
Loading...
