50 Graphic pro
profile using Profile Assistant. See “Using Profile Assistant”
on page 38.
4. Select a Simulation Target Profile (4).
This profile corresponds to the printer you want to
simulate.
If you wish to produce black and grey colours that are
printed using only black toner, enable the [Preserve Black]
option. Although this produces a better quality print, the
black and grey colours will not be simulated accurately.
5. Select your printer output profile (5).
If [Auto] is selected, the factory default profiles that are
embedded in the printer will be used. If you have created
a printer profile yourself using profile creation software,
select it here and choose a rendering intent (see page 62).
To Next Page
Loading...
Need help?
General
