2
2-52 Color Calibration
C9800 Color Guide - 52
12. Repeat the measurement process for the magenta, yellow, and black strips.
A check mark appears
on the circle of the
color just read, and the
Status field indicates
the color was measured
successfully.
Click Previous and
Next to reverse or
advance to another step
in the measurement
sequence.
13. When the Status field
indicates that all four color strips have been read successfully, click Accept
Measurements.
14. In the Measure dialog box, click OK.
15. Click Apply in the Calibrator window to implement the new calibration set.
16. Click OK in the Information dialog box.
This completes the Fiery calibration process.
To Next Page
Loading...
Need help?
General
