List of the Device Setting Menu Items
-96-
Mail
Server
Setup
POP Encryption None Selects an encryption method or e-mail
transmission.
Authentication Method None Sets the certification for e-mail transmis-
sion.
SMTP User ID (NULL) Sets a log-in name used for SMTP certifi-
cation.
SMTP Password (NULL) Sets a log-in password used for SMTP cer-
tification.
POP User ID (NULL) Sets a log-in name onto the server used
for POP certification or for printing
attached files of received e-mails.
POP Password (NULL) Sets a lo-in password onto the server used
for POP certification or for printing
attached files of received e-mails.
LDAP
Server
Setting
Server Setting LDAP Server (NULL) Sets an IP address or host name for the
LDAP server.
Port No. 389 Sets a port number.
Available range: 1 to 65535.
Timeout 30 seconds Sets the timeout value for the search
response from the LDAP server.
Available range: 10 to 120 seconds.
Max. Entries 100 Sets the maximum number of search
results from the LDAP server.
Search Root (NULL) Specifies a position to start searching the
LDAP directory.
Attribute Name1 cn Specifies an attribute used for searching.
Name2 sn
Name3 givenName
E-mail Address mail
Additional Filter (NULL)
Authentication Method Anonymous Sets the certification method.
For Digest-MD5, the DNS server must be
set. For Secure Protocol, the secure proto-
col server must be set.
User ID (NULL) Sets a user ID for certification of the LDAP
server. Maximum 80 characters.
Display condition: the authentication
method for LDAP is not set to [Anony-
mous].
Password (NULL) Sets a certification password for the LDAP
server. Maximum 32 characters.
Display condition: the authentication
method for LDAP is not set to [Anony-
mous].
Encryption None Sets the encryption of communication
with the LDAP server.
Secure
Protocol
Server
Setting
Domain (NULL) Sets a realm name for the Kelberos certifi-
cation.
Maximum 64 characters.
Item
Factory
Default
Description
To Next Page
Loading...
