Oki MB451 - Using Actkey Software; Installing the Software; Starting the Software

Installing Scanner Drivers (TWAIN/WIA/ICA Driver)
-105-
Scanning
4
Using ActKey Software
Using the ActKey, you can start a scan job in
specified settings with a click a button.
Memo
 ActKey does not support Mac OS X.
 Using WSD Scanning, Actkey does not work.
 When ActKey is installed, Network Configuration is also
installed simultaneously.
Reference
 For details on how to start a scan job, refer to the User's
Manual Advanced.
Installing the Software
1 Insert the "Software DVD-ROM" into your
computer.
A window opens.
2 Select [ActKey] from [Software].
3 Install the software as instructed.
4 Click [Finish].
Starting the Software
1 Click [Start] to select [All Programs] >
[Okidata] > [ActKey] > [ActKey].