Oki MB451 - USB Connection

Connecting to a Computer
-59-
Setup
1
8 Double-click [Driver] folder > [PS] or
[PCL] folder [Installer for Mac OSX].
9 Enter the administrator password, and
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
10 From the [Go] menu, select [Utilities]
and then double-click [Printer Setup
Utility].
Note
 If [Printer Setup Utility] is already running, close it
and open it again.
11 Click [Add].
If the [You have no printers available] dialog
box appears, click [Add].
12 Select the name of your machine whose
[Connection] is [Bonjour], and then
check that [OKI MB491(PS)] or [OKI
MB491(PCL)] is displayed in [Print
Using].
The name of your machine is displayed with the
format of "OKI-MB491- (the last six digits of the
MAC address)".
13 Click [Add].
14 If the [Installable Options] window is
displayed, click [Continue].
If you have installed the optional second tray unit
before the driver installation, configure each item
and then click [Continue].
15 Check that the name of your machine is
displayed in [Printer List], and then
close the window.
16 From the [Go] menu, select
[Applications] > [TextEdit].
17 Select the [File] menu > [Page setup].
18 Select the name of your machine from
[Format for].
19 Check that [OKI MB491(PS)] or [OKI
MB491(PCL)] is displayed correctly
under [Format for].
20 Click [OK].
21 Remove "Software DVD-ROM" from the
computer.
The installation is complete.
USB Connection
Perform the following procedure to connect your
machine to a computer via USB.
Connecting a USB Cable
1
Prepare a USB cable.
A USB cable is not supplied with your machine.
Prepare an USB 2.0 cable separately.
Memo
 Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-Speed
connection.