Oki MB451 - Page 58

Connecting to a Computer
-58-
9 Click [Default].
10 Select the name of your machine whose
[Kind] is [Bonjour], and then check
that [OKI MB491(PS)] or [OKI
MB491(PCL)] is displayed in [Print
Using].
The name of your machine is displayed with the
format of "OKI-MB491- (the last six digits of the
MAC address)".
11 Click [Add].
12 If the [Installable Options] window is
displayed, click [Continue].
If you have installed the optional second tray unit
before the driver installation, configure each item
and then click [Continue].
13 Check that your machine is displayed in
[Printers] and [OKI MB491(PS)] or
[OKI MB491(PCL)] is displayed in
[Kind].
Note
 If [OKI MB491(PS)] or [OKI MB491(PCL)] is not
correctly displayed in [Kind], click [-] to remove your
machine from [Print & Fax] and then Redo the
procedure from step 8 to 12.
14 Close [Print & Scan] (For Mac OS X
10.5 and 10.6:[Print & Fax]).
15 Remove "Software DVD-ROM" from the
computer.
The installation is complete.
 Using Bonjour (for Mac OS X 10.4.0
to 10.4.11)
Install the driver in the computer and set the
machine as a network printer.
Memo
 The following procedure uses Mac OS X 10.4.11 as an
example. Depending on an OS, the description may be
different.
Install the driver in the computer.
1 Ensure that your machine and the
computer are turned on and connected.
Reference
 "Connecting an Ethernet Cable" P. 47
2 From the Apple menu, select [System
Preferences].
3 Select [Network].
4 Select [Network Port Configurations]
from [Show], and then check that
[Built-in Ethernet] is selected.
5 Close [Network].
6 Insert "Software DVD-ROM" into the
computer.
7 Double-click the [OKI] icon on the
desktop.