Configuring Copy Settings
-84-
Resetting Copy Settings
Auto Reset
All settings you configured for your copy job
return to their default values if no operation is
made for a set period of time. The auto reset
time is set to 3 minutes as the factory default
setting.
You can change the auto reset time by configuring [Admin
Setup] from the <SETTING> key. For details, refer to the
User's Manual Advanced.
Using the <RESET/LOG OUT> key
By pressing the <RESET/LOG OUT> key, the
settings you configured for your copy job return
to their default values.
After copying, press the <RESET/LOG OUT>
key to reset the default settings for the next
user.
To Next Page
Loading...
